The bestselling Diamond lamp – now in an upgraded version featuring red light, a gradual power increase function, and Multi LED technology.
More than just curing
A powerful and highly efficient lamp is the foundation of safe and flawless gel and UV gel manicures. Discover a device that:
- Cures even the most demanding formulas thanks to gradual LED power build-up technology
- Offers three light modes: blue, pink, and red
- Features 12 red light LEDs with a wavelength of 660 nm
- Allows you to customise the digital display to suit your preferences
What are red and pink light? Let us explain!
This is LED light technology that uses wavelengths of approximately 630–700 nm, penetrating deep into the dermis to stimulate fibroblasts to produce collagen and elastin. As a result, it improves skin firmness, reduces the appearance of wrinkles, accelerates regeneration, enhances microcirculation, and provides anti-inflammatory benefits—making it an effective anti-ageing solution.
The red light used in our lamp emits at a wavelength of 660 nm.
Pink light is simply a combination of traditional blue light (used in all UV gel and gel curing lamps) and red light. This means that while curing your manicure, your skin is simultaneously exposed to red light therapy.
Your manicure and your skin deserve more. Choose the Semilac Multi LED lamp with red light and experience a new standard in professional nail styling.
Red Light Technology – the future of nail styling.
What will make you love the Multi LED Red Light System lamp?
- Three light types – blue, pink, and red
- Four curing times – 10, 30, 60, and 90 seconds
- A fifth timer mode – 360 seconds, dedicated exclusively to red light
- LOW HEAT mode, where the lamp operates at 60% power for the selected time
- Built-in gradual power increase function, curing even the most demanding formulas
- Motion sensor for convenient use
- Option to reverse the display orientation
- Enhanced comfort when curing formulas that require longer times
- Compatibility with all formulas – acrygel, gel, UV gel, and easy-off system
Instructions
Please read the instruction manual before using the lamp. The lamp is designed to cure UV gel polishes, acrygels, UV gels, and LED light easy-off systems.
Standard Mode
Connect the device using the original power adapter. Using a different adapter or one with a voltage other than specified in the technical specifications may cause permanent damage. Connection sequence: plug the adapter into the lamp first, then connect it to the power source.
The default curing time is set to 60 seconds. After leaving standby mode, select a curing time by pressing the 10s / 30s / 60s / 90s buttons.
The 10s, 30s, 60s, and 90s modes operate with the motion sensor. When you place your hand inside the lamp, the light switches on automatically and switches off when you remove your hand. In these modes, the timer counts down on the display. Pressing the button again stops the current programme.
Pink Light Mode
Press and hold the 60s button for 1.5 seconds to activate Pink Light Mode. The display will show “PXX”, and all 24 UV/LED diodes plus 12 red diodes (emitting 660 nm wavelength) will light up simultaneously for an enhanced effect.
You can select the curing time using the timer buttons. Modes P10s, P30s, P60s, and P90s work with the motion sensor. When you place your hand inside the lamp, the light switches on automatically and switches off when you remove your hand.
To exit Pink Light Mode, press and hold the 60s button again for a few seconds.
Low Heat Mode
Press and hold the 30s button for 1.5 seconds to activate Low Heat Mode. The display will show “LXX”. In this mode, the lamp power is reduced to 60%, which is ideal for users with sensitive skin and nails.
You can select the curing time using the timer buttons. Modes L10s, L30s, L60s, and L90s work with the motion sensor. When you place your hand inside the lamp, the light switches on automatically and switches off when you remove your hand.
While in Low Heat Mode, you can also activate Pink Light Mode by pressing and holding the 60s button for 1.5 seconds.
To exit Low Heat Mode, press and hold the 30s button again for a few seconds.
Red Light Mode
Press and hold the 90s/360s button for 1.5 seconds to activate Red Light Mode. The display will show “360”. In this mode, only 12 red LEDs light up, emitting light with a wavelength of 660 nm.
Press and hold the 90s/360s button again for a few seconds to deactivate this mode.
Note: Red Light Mode is not intended for curing UV LED products.
Display Direction Adjustment
Press and hold the 10s button for 1.5 seconds to rotate the display orientation.
Specifications
36 LEDs total:
- 24 UV/LED diodes (365 nm + 405 nm)
- 12 UV/LED/Red diodes (365 nm + 405 nm + 660 nm)
Input Voltage: 100–240 VAC, 50/60 Hz
Output Voltage: 24 VDC, 1.0 A
Power: 30 W (max)
Characteristics
- Curing modes: 10, 30, 60, or 90 seconds
- Gradual power increase for comfortable curing
- 12 LED diodes emitting light at 660 nm during or after curing
- High-efficiency LED diodes – durability of up to 50,000 hours
- Elegant soft-matte finish – modern and stylish design
- Adjustable display – set the screen direction to your preference
- Suitable for manicure and pedicure – functional and convenient
- Built-in motion sensor – automatic activation and deactivation
Contents of the Package
- Semilac UV LED lamp (x1)
- AC power adapter for the Semilac UV LED lamp (x1)
- Instruction manual (x1)
